Using The Mail Notification Function To Report Problems; Reading Error Notification Mail - Epson EH-TW490 User Manual

Monitoring and Controlling
Name
F
[Page] buttons Changes pages in files such as PowerPoint files when using
[[][]] the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)"
• When using USB Display
s "Projecting with USB Display"
• During a network connection
When projecting images or scenarios using PC Free,
pressing these buttons displays the previous/next screen.
G
[Source Search] Changes to the next input source that is sending an image.
button
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)"
H
[LAN] button Changes to the image projected with EasyMP Network
Projection. When projecting using the optional Quick
Wireless Connection USB Key, this button switches to
that image.
s "Switching to the Target Image by Remote Control"
p.30
I
[USB] button Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB port
s "Switching to the Target Image by Remote Control"
p.30
J
[a] Decreases the volume.
[Volume] buttons
[a][b]
[b] Increases the volume.
s "Adjusting the Volume"
Function
p.54
p.30
p.29
p.39
Using the Mail Notification Function to Report
Problems
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
Network - Mail - Mail Notification
s
a
• Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
• If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
• If you set Standby Mode to Communication On, you can control
the projector even if it is in standby mode (when the power is
off).
s ECO - Standby Mode

Reading Error Notification Mail

When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
p.80
p.82
63