To Set Timer - Panasonic CS-NE12MKE Operating Instructions Manual

Air conditioner indoor unit/outdoor unit
Hide thumbs Also See for CS-NE12MKE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

TO ENJOY CLEAN &
6
FRESH AIR
PATROL - To monitor air quality
• Detects air quality; e-ion operation activates when air
quality is at dirty level.
• Can be activated even when the unit is turned off.
• Patrol starts automatically with the unit switched on with
OFF/ON
.
TO FRESHEN AND PURIFY THE
7
AIR
• Generates negative ions to produce fresh air effect and
attract dust which will then be captured at the positively
charged e-ion fi lters.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing can not be adjusted.
TO USE MAINTENANCE
8
HEATING
• Maintain indoor temperature at 8/10°C. Fan switches to
high fan speed automatically.
• This operation overwrite the operation
mode and could be cancelled by
pressing
.
• Defrost operation at outdoor unit will
result in sudden cold air from indoor
unit.
Eliminate cold air with heat mode.
TO ENJOY QUIET OPERATION
9
• This operation reduces airfl ow noise.
TO REACH TEMPERATURE
10
QUICKLY
• This operation will stop automatically after 20 minutes.
Press and hold for 5 seconds to dim or restore the
11
unit's indicator brightness.
Press and hold for approximately 10 seconds to
12
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
13
Not used in normal operations.
14
PATROL
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
QUIET
• Cannot be selected at the same time.
• To turn ON or OFF the unit at a preset time.
+8/10°C HEAT
ON
1
OFF
Select ON or
10˚C
OFF timer
• To cancel ON or OFF timer, press
8˚C
press
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
NOTES
NOTES
QUIET
POWERFUL
,
,
,
operation can be activated independently.
POWERFUL
PATROL
,
,
,
TO SET THE TIMER
TO SET THE TIMER
2
Set the time
.
CANCEL
SET
.
,
SET
Confi rm
ON
or
then
OFF
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents