Lock Unsuitable Content; Change Language - Philips 6PFL3507 User Manual

Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined duration.
Tip
•
You can switch off your TV earlier or reset the sleep
timer during the countdown.
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
» The [Sleep timer] menu appears.
3
Select a value between zero and 180
minutes.
» The sleep timer can be set in steps
of ten minutes. If you select zero, the
sleep timer switches off.
4
Press OK to switch on the sleep timer.
» The TV switches to standby after the
specified time.

Lock unsuitable content

You can prevent your children from watching
certain programs or channels by locking the TV
controls.
Set or change code
1
Press .
2
Select [Setup] > [Channel settings] >
[Child lock].
3
Select [Set code] or [Change code].
» The [Set code] / [Change code] menu
appears.
4
Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
•
If you forget your code, enter '8888' to override any
existing codes.
Lock or unlock one or more channels
1
Press .
2
Select [Setup] > [Channel settings] >
[Child lock] > [Channel lock].
» A list of channels is displayed.
3
Select the channel that you want to lock or
unlock, then press OK.
» The first time you lock or unlock a
channel, you are prompted to enter
your PIN code.
4
Enter your code and press OK.
» If the channel is locked, a lock icon
displayed.
5
Repeat the process to lock or unlock more
channels.
6
To activate the locks, switch the TV on and
off.
» When you switch channels with
CH+/-, the locked channels are
skipped.
» When you access the locked channels
from the channel grid, you are
prompted to enter your PIN code.

Change language

You can change the language of the onscreen
menu.
Depending on your broadcaster, you can change
the audio language, subtitle language, or both,
for a TV channel.
EN
17