Use Timers; Lock Unsuitable Content - Philips 40PFL5606D User Manual

Display the TV clock
1
While you watch TV, press
» The options menu is displayed.
2
Select [Clock].
» The clock is displayed.
3
Press OK.
Note
•
To disable the clock, repeat the procedure.
Change the clock mode
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Auto clock].
3
Select [Automatic] or [Manual], then press
OK.
Change the time zone
Note
•
This option is only available if you select [Auto clock] >
[Automatic] (in countries with clock transmission data).
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences] > [Clock] > [Time zone].
3
Select your time zone.
4
Press OK to confirm.

Use timers

You can set timers to switch the TV to standby
at a specified time.
Tip
•
Set the TV clock before you use timers.
EN
18
Downloaded From TV-Manual.com Manuals
Automatically switch the TV to
standby (sleep timer)
OPTIONS.
Sleep timer switches the TV to standby after a
pre-defined duration.
1
2
3
4

Lock unsuitable content

You can prevent your children from watching
certain programs or channels by locking the TV
controls.
Set or change code
1
2
3
4
Tip
•
You can switch off your TV earlier or reset the sleep
timer during the countdown.
Press .
Select [Setup] > [TV settings] >
[Preferences] > [Sleep timer].
» The [Sleep timer] menu appears.
Select a value between zero and 180 minutes.
» If you select zero, the sleep timer
switches off.
Press OK to switch on the sleep timer.
» The TV switches to standby after the
specified time.
Press .
Select [Setup] > [Channel
settings]>[Child lock].
Select [Set code] or [Change code].
» The [Set code] / [Change code] menu
appears.
Enter your code using the Numeric buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
•
If you forget your code, enter '8888' to override any
existing codes.