Copy Your Tapes (Dubbing) - Panasonic Omnivision PV-C1322-K Operating Instructions Manual

Copy Your Tapes (Dubbing)

Connections you'll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUT
IN
Playback (Source)
1 Insert pre-
recorded tape.
2
Press PLAY then
3
PAUSE at starting
point to put in
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
Press PLAY
4
to start dubbing.
Press STOP
5
to stop dubbing.
STOP
Caution
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Recording (Editing) unit
IN FROM ANT.
VIDEO IN
OUT TO TV
Recording (Editing) unit
Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
. The display will change as follows.
LINE
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press
ACTION for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
AUDIO IN
AUDIO IN
1 2 3
(CABLE)
(TV)
125 or 69
13