Panasonic SC-PT460 Operating Instructions Manual page 25

QUICK SETUP enables successive settings of the items in the shaded area.
∫ "AUDIO" menu
§5
DOLBY DIGITAL
§5
DTS
§5
MPEG
DYNAMIC RANGE
SPEAKER SETTINGS
Make settings for your
speakers.
§5
When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item
selected, the actual output will depend on the performance of this connected equipment.
∫ "DISPLAY" menu
LANGUAGE
Choose the language for the
on-screen messages.
[BITSTREAM] Select to suit the type of equipment you connected to the
≥
HDMI AV OUT terminal.
≥ PCM
[BITSTREAM]
≥
Select "BITSTREAM" when the equipment can decode the
≥ PCM
bitstream (digital form of 5.1 channel data). Otherwise, select
≥ BITSTREAM
"PCM".
[PCM]
≥
(If the bitstream is output to the equipment without a decoder,
high levels of noise can be output and may damage your
speakers and hearing.)
≥ ON: Adjusts for clarity even when the volume is low. Convenient for late night
viewing. (Only works with Dolby Digital)
[OFF]
≥
≥ SETTINGS:
[0ms]
≥C DELAY:
, 1ms, 2ms, 3ms, 4ms, 5ms
Select the delay time for your center speaker (➜ 27, Selecting the delay time of
the speakers).
[0ms]
≥SL/SR DELAY:
Select the delay time for your surround speakers (➜ 27, Selecting the delay
time of the speakers).
≥TEST TONE: SETTING
Use the test tone for speaker level adjustments (➜ 32, Adjusting the speaker
level).
≥CENTER, SURROUND RIGHT, SURROUND LEFT: `6 dB to i6 dB
[0\dB]
(Factory preset:
[ENGLISH]
≥ ≥FRANÇAIS
≥ ≥SVENSKA
, 5ms, 10ms, 15ms
)
≥ESPAÑOL ≥DEUTSCH
≥NEDERLANDS ≥POLSKI
(Continued on next page)
25