Step 4 Ac Mains Lead Connection; Step 5 Preparing The Remote Control - Panasonic SC-PT460 Operating Instructions Manual

Other audio connections
TV or external
equipment terminal
Optical digital audio cable
≥Do not bend sharply when
OPTICAL OUT
connecting.
AUDIO
OUT
L
R
4
step
AC mains lead connection
BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
To household mains socket
AC mains lead
(included)
Conserving power
This unit and the wireless system
amount of power, even when they are turned off (this
unit: approx. 0.4 W, wireless system
To save power when they are not to be used for a long
time, unplug them from the household mains socket.
You will need to reset some memory items after
plugging in this unit.
5
step
Preparing the remote control
∫ Batteries
Insert so the poles (i and j) match those in
the remote control.
R6/LR6, AA
≥Do not use rechargeable type batteries.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed
to direct sunlight for a long period of time with doors
and windows closed.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
Cable required
(not included)
Audio cable
This unit
AC IN
§
consume a small
§
: approx. 0.3 W).
This unit terminal
[\\\\OPTICAL\IN\\\\\\] This unit can decode the surround signals
received through the set top box, digital
broadcasting or satellite broadcasts. Refer
to your equipment's operating instructions
for details. Only Dolby Digital and PCM can
OPTICAL
be played with this connection.
IN
≥After making this connection, make
settings to suit the type of audio from your
digital equipment (➜ 33).
[\\\\\\\\\\\AUX\\\\\\\\\\\] This connection enables you to play audio
from your TV, set top box or video cassette
recorder through your home theater
L
system (➜ 33, Enjoying TV audio).
R
AUX
To household mains socket
Ferrite core
AC mains lead
(included)
[Note]
The included AC mains lead(s) is(are) for use with this
unit and wireless system
equipment. Also, do not use cords for other equipment
with this unit or wireless system
§
Wireless system: For
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage
which can severely damage the remote control.
Remove the batteries if the remote control is not going
to be used for a long period of time. Store in a cool, dark
place.
∫ Use
Aim at the remote control signal sensor (➜ 15),
avoiding obstacles, at a maximum range of 7 m
directly in front of the unit.
Features
[PT467]
Wireless system
AC IN
§
only. Do not use it with other
§
.
[PT467]
only
11 11