Panasonic Viera TX-P42XT50B Operating Instructions Manual page 100

Message
Invalid system time. Please
exit !
Invalid system time, Timer
Programming will not work.
Please press TV button on
remote control and check time
display on Banner
Max. number of timers already
set !
New channels found!
Press OK to update channel
list.
Press EXIT to ignore.
No channel found.
Please check aerial or local
signal availability.
Press OK to start Auto Setup.
No module inserted
No recording - Already
recording
No recording - Check media
No recording - Playing
No recording - Unknown
reason
No service
No signal
Overcurrent error on USB
device occurred.
Please remove the USB device,
and switch off the TV by mains
power switch.
PIN incorrect!
Please check settings and
connections on HDMI devices.
Please wait.
Recording this channel now
Reset to Factory Shipping
Condition Completed. TV will
automatically restart. Do not
turn off
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed. Please
try again later.
Press EXIT to continue.
100
●
Cannot get the time information and cannot edit Timer Programming screen.
Check the connection of the RF cable.
●
Cannot get the time information. If there is no time displayed on the Information
banner, check the connection of the RF cable.
●
The maximum number of timer programming events is 15.
● There may be new channels available.
●
This message will appear each time a change is made by the broadcasters.
This message can be deactivated by setting [New Channel Message] to [Off] in
[DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
● Follow the on-screen instructions.
●
Please also refer to p. 97.
●
If channels are still not found, consult your local Panasonic dealer.
●
Check the CI module is inserted completely (p. 59).
●
The equipment may already be recording.
● The tape or disc may be "write protected", full, missing or damaged.
● The equipment may be playing the tape or disc.
● The recording may not be performed. Check the equipment.
●
The broadcaster has stopped the service. Check the channel in the TV Guide.
(p. 25)
●
The TV cannot detect the signal. Check the connection of the RF cable.
●
The connected USB device might cause overcurrent error. Follow the on-
screen instructions.
●
Check if foreign objects are inside the USB port.
●
The PIN number you entered is wrong.
●
Communication error in VIERA Link function (p. 81).
● A function is in progress.
● The recorder is recording the programme from its own tuner. You can turn the
TV off and leave the equipment recording in the normal way.
●
[Auto Setup] will automatically start (p. 16).
●
Q-Link or VIERA Link channel download is in progress.
●
The software updating is finished.
●
Perform [System Update Search Now] in System Update (p. 60).
If this is still unsuccessful, there may not be any new software available.
Meaning / Action