HP ProBook 4425s Quickspecs page 27

QuickSpecs
Technical Specifications
Additional
information
DA - 13610 North America — Version 16 — September 29, 2011
This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 90% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Corrugated Carton 412 g
Corrugated 326 g
Internal:
Polyethylene low density 20 g
Molded Pulp 150 g
The Corrugated Carton packaging material is made from 85% recycled
content.
The Molded Pulp packaging material is made from 90% recycled
content.
The Polyethylene low density packaging material is made from 85%
recycled content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
HP ProBook 4425s Notebook PC
Page 27