Tablet Parts 1 Power ON/OFF button 5 Volume + 2 Headset Port 6 Volume - 3 micro USB Port 7 TF card (Micro SD card) port 4 DC Jack Getting Started Battery Charging The tablet has a built-in rechargeable Li-polymer battery. 1.
Page 6
3. The tablet can be used even if the battery is being charged. Power ON/OFF 1. Press and hold the power button until the tablet turns “ON”. OFF: 1. Press and hold the power button until device optional 2. Select power off 3.
Page 7
Note: Insert the TF card in correct position, otherwise it will damage the card and the slot. Software Keyboard The tablet has a software keyboard which automatically show up when you tap the place on screen where text or number are to be entered.
Connecting to Internet Ethernet: 1. Connect the Ethernet cable to the Ethernet port of the tablet. 2. Select “Settings” and Select “ More…” then Select “Ethernet” Wireless: 1. Select “ Settings” 2. Select “Wi-Fi” and slide OFF to ON status. 3.
Web Browsing Connect to the internet via Ethernet or wireless and launch the browser. Task Bar The Task Bar will show the following: SD card, Battery, Time, Return/Back, Desktop, Menu and Wireless SD card Battery Time Return/Back Destktop Menu Wifi network...
Install and Uninstall Install from memory card or USB drive Please go to APK Manager,Select “Install” and then select the file with the extension name .apk in the memory card. Select “Install” to install the software. Install application from internet You can use Play Store to search any application you want, after download finish it will automatic install After installation, you can run the software right away or run the...
Page 11
1.Touch the icon at the bottom right and you can save your photos in DCIM/Camera directory in TF card. 2. Move the icon on the right and you can switch camera mode to film mode. 3. touch the icon on the top right to see the previous picture and you can also delete, share, set it as the wallpaper or contact profile.
Trouble Shooting Close Application All running applications take up system memory and will slow down system response. Please shut down all idle applications to release memory and get the system speed back to normal. To close the application, click the icon on the shortcut bar to enter the system configuration interface.
Page 13
Mandatory Power off 1. Press and hold the power button for 7 seconds and the device will be powered off. 2. Press the reset button on the right and the device will be forced to be powered off. Restore Default Setting If you want to reset the factory setting and erase all materials, please press Settings →...
Page 14
This warranty shall be void upon transfer of ownership of this product and is effective only when used in the United States. Michley Tivax agrees to repair or replace this unit at no charge, within the warranty period, providing that the product is delivered to Michley Tivax in its original package or equivalent, fully insured, with all shipping charges prepaid and a return authorization number listed on the outside of the packaging.
Page 15
In no event will Michley Tivax be liable for any special, incidental, or consequential damage, loss of revenue, or cost of replacement goods resulting from the use of malfunction of this product to the equipment system on which it is used.
Need help?
Do you have a question about the MiTraveler 7D-8 and is the answer not in the manual?
Questions and answers