Selecting The Location; Connecting The Power Adapter - Fujitsu Siemens Computers AMILO Li Series Easy Manual

Selecting the location

Location,selectingthe Power adapter Notebook
Select a suitable location for the notebook before setting it up. Consider
the following points when selecting a location:
• Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause damage due to overheating.
• Do not place the notebook directly on your legs for extended periods. The
underside of the notebook heats up during normal operation. Extended contact
with the skin can become unpleasant or even result in burns.
• Place the notebook on a stable, flat, non-slip surface. Please note that
the rubber feet may mark certain types of surfaces.
• Keep other objects 100 mm away from the notebook and its mains
adapter to ensure adequate ventilation.
• Never cover the ventilation slots on the notebook or the mains adapter.
• Do not expose the notebook to extreme environmental conditions. Protect
the notebook against dust, humidity and heat.

Connecting the power adapter

Power adapter Preparingforoperation
Two different mains adapters are available for this computer. Use only
the mains adapter supplied with your computer.
Please refer to the instructions in
The power cable supplied conforms to the requirements of the country in which
you purchased your notebook. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter's power cable must only be connected to a mains socket
if the notebook is connected to the mains adapter.
Make sure that the rated current of the mains adapter is not higher than that
of the power system to which you connect the mains adapter (see section
"Technical data",
1
2
10600900868, edition 1
"Safety information", Page
"Mains adaptor 65W or 90W", Page
3
Using your notebook for the first time
56).
► Connect the mains adapter cable (1) to the
DC jack (DC IN) on the notebook.
► Plug the power cable (2) into the
mains adapter.
► Plug the power cable (3) into a mains outlet.
4.
9