The Notebook Stops Working; The Printer Does Not Print; The Radio Connection To A Network Does Not Work - Fujitsu Siemens Computers AMILO Li Series Easy Manual

Troubleshooting and tips

The notebook stops working

Energysaving mode Notebook
Cause
Notebook is in energy saving mode.
An application programme has caused the
malfunction.
The battery is dead.

The printer does not print

Printer doesnotprint
Cause
The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork
Cause
The wireless component is disabled.
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
54
Troubleshooting
► Leave energy saving mode.
► Close the application program or restart
the notebook by switching it on/off or with
a warm boot.
► Charge the battery.
or
► Install a charged battery.
or
► Connect the mains adapter to the
notebook.
Troubleshooting
► Make sure that the printer is switched on
and is online (see the manuals supplied with
the printer).
► Check that the cable connecting the
notebook and the printer is connected
properly.
► Check that the cable connecting the
notebook and the printer is connected
properly.
► Check whether the correct printer driver is
loaded (see printer documentation).
Troubleshooting
► Switch the radio components on (see
"Switching wireless LAN module on and off",
Page 32).
► Check whether the radio connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files
(see "Information sources", Page 5).
10600900868, edition 1