Selecting A Location; Connecting The Mains Adapter - Fujitsu Siemens Computers Siemens AMILO L Series Easy Manual

Table of Contents

Advertisement

Preparing the notebook for use

Selecting a location

Select a suitable location for the notebook before setting it up. Consider the following
!
points when looking for a location:
Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
Do not place the notebook on your legs for a longer period of time. The underside of
the notebook heats up during normal operation. Longer contac with the skin can
become unpleasant or even result in burns.
Place the notebook on a stable, flat, nonslippery surface. Please note that the rubber
feet may mark certain types of surfaces.
Keep other objects 100 mm away from the notebook and its mains adapter to ensure
adequate ventilation.
Never cover the fan intake or exhaust openings of the notebook or the mains
adapter.
Do not expose the notebook to extreme environmental conditions.
Protect the notebook from dust, humidity, and heat.

Connecting the mains adapter

Please take note of the information in the section "Safety notes".
!
The power cable supplied conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The mains adapter's AC cable should only be connected to a mains socket if the
notebook is connected to the mains adapter.
Do not use the mains adapter for other notebooks or devices.
Do not use a mains adapter that is not specially intended for this notebook.
Make sure that the rated current of the mains adapter is not higher than that of the power
system to which you connect the mains adapter (see technical data of the mains adapter).
12
10600648445, edition 1

Advertisement

Table of Contents
loading

Table of Contents