Connecting External Devices - Fujitsu Siemens Computers AMILO Li Series Easy Manual

Connecting external devices

Always refer to the safety information provided in
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connecting or disconnecting
devices to your notebook:
Connecting devices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into the mains sockets.
Peripheraldevices Devices
Disconnecting devices from the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
Peripheraldevices Devices
Some of the external devices require special drivers (see the operating
system and external device documentation).
10600900868, edition 1
Connecting external devices
"Important notes", Page 4 before
37