Cycle Option Buttons - LG DLE3733W User's Manual And Installation Instructions

CYCLE OPTION BUTTONS

Your dryer features several additional cycle
options to customize cycles to meet your
individual needs. Certain option buttons also
feature a special function (see the following page
for details) that can be activated by pressing and
holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
Turn on the dryer and turn the cycle selector
1
knob to select the desired cycle.
2 Use the cycle settings buttons to adjust the
settings for that cycle.
3 Press the cycle option button(s) for the
option you would like to add. A confirmation
message will be shown in the display.
4 Press the START/PAUSE button to start the
cycle. The dryer will start automatically.
CHILD LOCK
Use this option to prevent unwanted
use of the dryer or to keep cycle
CHILD LOCK
settings from being changed while the
dryer is operating.
All controls are disabled. The dryer can be locked
during a cycle.
WRINKLE CARE
Selecting this option will tumble the
load periodically for up to 3 hours after
WRINKLE CARE
the selected cycle, or until the door is
opened. This is helpful in preventing
wrinkles when you are unable to immediately
remove items from the dryer.
DAMP DRY BEEP
With this option, the dryer will beep
when the load is approximately 80%
DAMP DRY BEEP
dry. This allows you to remove faster-
drying lightweight items or items
that you would like to iron or hang while still
slightly damp.