Refrigerator Temperature; Super Cool; Fuzzy Logic; Memory Back-Ups - LG Refrigerator-Freezer Owner's Manual

Operation
Refrigerator
temperature

Super cool

Fuzzy Logic

Memory back-ups

Temperature control
You can set refrigerator temperature using the
button. Whenever pressing the
LED emit light. The temperature of the compartment is
lowered as the LED luminance from
"coldest" . You can select the desired setting point by
pressing the
coldest point. If three LED glow, it means that
refrigerator operates in normal position. For economic
electricity set the LED to the cold position.
If button is pressed for 5 second refrigerator
goes to Super Cool mode, in this case super cool LED
glows. This function allows you to gear up for any
urgent cooling needs. In this mode the compressor
runs continuously for a few hour giving you cold water
and ice when you need it. This function is very helpful
for parties and special occasion, where the refrigerator
is subjected to heavy load and you need instant cooling
of the food. The super cool system released when the
temperature of refrigerator compartment get specified
degree.
Fuzzy logic is a special function which keeps refrigerator temperature constant and not let
it warm whenever the ambient temperature change or refrigerator is subjected to frequent
door open/close. Refrigerator with
refrigerator inside temperature as per ambient change or frequency of frequent door
open/close.
In case of power failures, your refrigerator setting will keep in memory and as soon as the
power on, your last refrigerator settings will be restored.
– Refrigerator
COLD COLDEST
7
Applicable For GL-392 DM, GL-432 DM
button, the
"Cold"
button, LED glows from cold to
fuzzy logic will automatically compensate the
Your refrigerator has two controls that let you regulate the
temperature in freezer and refrigerator compartments.
You can set the refrigerator temperature using the refrigerator
temperature control, whenever pressing the
LED emit light. The temperature of the compartment goes
down as the LED luminesce from cold to coldest.
You can select the desired set point in five (5) steps between
cold to coldest.
SUPER COOL
to
COLD COLDEST
SUPER COOL
COLD COLDEST
Press this button for 5
seconds and super
cool button will turn on
button, the