3. S
ETUP
Mounting
Orientation
Rigging
Power Linking
This fixture contains power linking via the edison outlet located in front of the power input cable.
Please see the diagram below for further explanation.
The maximum number of fixtures that may be linked for this fixture is 20.
Fixture #3
Fixture #2
Fixture #1
Scorpion™ GBC User Manual
This fixture may be mounted in any safe position, provided there is adequate room for
ventilation.
It is important never to obstruct the fan or vents pathway.
Mount the fixture using, a suitable "C" or "O" type clamp.
Adjust the angle of the fixture by loosening both knobs and
tilting the fixture. After finding the desired position, retighten
both knobs.
When selecting installation location, take into consideration
access and routine maintenance.
Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
Do not use any tool on the bracket adjustment knob. Hand-tighten only!
Additional
power link
12
Hanging Clamp
Note!
Clamp is sold separately.
12/17/2009 10:50 AM