I How To Use The Mode Selection Button; Cooling Operation - LG PQRCUDS0 Owners & Installation Manual

How to use the Mode Selection Button
How to use the Mode Selection Button

Cooling Operation

What is the three-minute delay function?
The function to protect the compressor delays the output of cool air when operating instantly after
interrupting the cooling operation.
Cooling operation restarts after 3 minutes when the compressor starts to operate.
• You can choose the expected temperature from 18(C to 30(C.
• It is recommended that the ideal difference of the temperature between indoors and outdoors should be
less than 5°C.
12 Deluxe Wired Remote Controller
1
Cooling operation will begin if you press the On/Off
button.
2
Press the temperature button and set the expected
temperature lower than the current room temperature.
(18~30°C)
A click of the button will increase the expected temperature by 1°C
A click of the button will decrease the expected temperature by 1°C.
If the expected temperature is set higher than the current
room temperature, the cooling function will not begin and
just the blowing operation will continue.
3
Press the operation selection button and choose one of
the functions among blowing, automation, heating, and
dehumidification if you want another operation mode
during the operation.
4
If you press the On/Off button, the cooling operation
will stop.