Introduction; Important Safety Instruction - LG SXS Refrigerator User Manual

Introduction

Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase
Dealer purchased from
Dealer address
Dealer phone no.
Model no.
Serial no.

Important safety instruction

This refrigerator must be properly installed and located in accordance with the
installation instructions before it is used.
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over or damage
the power cord.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
Unplug the power cord from the power plug for cleaning or other cares. Never touch it
with wet hands because you can get an electric shock or be hurt.
Never damage, process, severely bend, pull out, or twist power cord because power
cord damage may cause a fire or electric shock. You have doubts on whether the
appliance is properly grounded.
Never place glass products in the freezer because they may be broken when their inner
matters are frozen.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young childeren should be supervised to ensure that they do not play with the
appliance.
Don't use an If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
extension cord other appliances or household lights from causing an overload that could cause a power
outage.
Accessibility of The refrigerator-freezer should be so positioned that the supply plug is accessible for
Supply Plug quick disconnection when accident happens.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
Supply Cord
agent or a similarly qualified person in order to avoid a hazard.
Replacement
Warning Do not modify or extend the Power Cord length.
3
It will cause electric shock or fire.
:
:
:
:
:
: