Hamilton Beach 94950 Operation Manual page 5

Mixing a Drink
wWARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
1. Place the ingredients to be mixed into an
appropriate container. See the "Mixing
Containers" section on the previous page.
2. Set the speed control for the desired mixing
speed.
NOTE: You will have to develop the speed and
time required to obtain the desired results with
various mixes.
3. Set the power switch to the ON position.
NOTE: The agitator MUST always be on before
it comes in contact with the ingredients.
4. Slowly insert the container up into the mixer
until the agitator comes in contact with the
ingredients. Move the container up and down
for thorough mixing. The splash shield will move
up and down when it comes in contact with your
hand or wrist.
5. When the mixing is complete, slowly lower and
remove the container from the mixer and set the
power switch to OFF.
NOTE: Agitator is subject to wear and tear during
normal usage. Inspect agitator daily. Replace
agitator every 90 days.
wWARNING
Cut Hazard
Always use collar with paper cup
when operating.
Always use shield when mixing.
Do not put spoon or other utensils
in cup when mixing.
Failure to follow these instructions can
result in broken bones or cuts.
Use collar with paper cup
Operating the Mixer
5