Moisture - JVC RX-206BK Instructions Manual

,IYE
- a
E
:
@
.r4-
rgF
OO .CI
RX-207TN/RX-2068K
Introduction
a
a
Thank you for purchasing thls JVC Receiver. We hope it will
be a valued addition to your stereo system. Be sure to read
these instructions carefully before operating the receiver. This
manual gives you the basic information you need to set up
and use your receiver. lt explains everything you need to
know from turning on the power switch to basic troubleshoot-
ing. Please consult your JVC dealer if you have any questions
about the receiver.
Use this manual to help you wlth the following:
Connect your other stereo components to the receiver.
Learn the functions of the controls and indicators on the
recerver.
Preset radio stations into the receiver's memorv.
Operate the receiver.
Troubleshoot, if there is a oroblem with the receiver.
This manual is organized as follows:
The first part of this manual tells you how to connect your
other stereo components and antennas to the receiver;
The second part of this manual introduces you to the controls
and indicators on the receiver.
The third part of this manual tells you how to operate the
recetver.
The fourth part of this manual provldes a troubleshooting
guide and specifications
for the receiver.
Use the following guidelines to help you follow the
instructions in this manual:
Keys or buttons to be pressed are indicated with capitalletters,
for example: TUNING key.
Connection points on the back of the receiver are indicated
with all capital letters, for example: PHONO
Names of indicators that light up on the receiver are indicated
with all capital letters, for example: TUNED
Steps that you need to follow to get the correct results, are
labeled lmportant!
Additional information that is helpful to know, is labeled fVote:
a
a
a
RX-307TN/RX-3068K
I nstallation P reparation
Locatlng the Becelver
Install the receiver in a place that is level and protected from
moisture.
The temperature around the receiver must be between 23o
and
'104o
Fahrenheit (-50 and 40o Celsius).
Make sure there is good ventilation around the receiver. Poor
ventilation could cause over-heating and damage the receiver.
The receiver could cause some interference with television
reception. Locate the receiver away from your TV to prevent
interference.
Maklng Power Gonnectlons
Do not handle the oower cord with wet hands.
Do not pull on the power cord to unplug the receiver. Always
pull the molded plug at the end of the cord instead.
llandllng the Becelver
Do not insert any metallic object into the receiver.
Gautlon: To reduce rlsks, such as electilc
shocks or flres:
l. Do not temove scrows, Govets, or cablnet.
2. Do not expose thls appllance to raln or
molsture.
6
| ,UD $.) ,0D.
il j
ffi
| 'es!$
Page 3