Setting The Channel Selection - JVC KV-C10 Instructions Manual

Setting the channel selection

You can set the channel selection method either to select only the receivable channels in
memory or to select all the channels.
Remember that if you want to select only the receivable channels, you must store the channels
first. To store them, see page 11.
DOWN
1
Monitor
MODE
2
Monitor
AUTO/MANU
12
2 1
UP AUTO/MANU MODE
KV-M700 color monitor
Remote
Select TV as the input source.
CH
Press the MODE button on the monitor or the remote
controller repeatedly to select TV.
MODE
H/P H/P
VOL VOL
CH
Set the channel selection to "AUTO" or
Remote
"MANUAL."
Press the AUTO/MANU button on the monitor or the SKIP
SKIP
button on the remote controller.
Each time you press the button, the channel selection
alternates between "AUTO" and "MANUAL."
AUTO:
MANUAL: All the channels can be selected. (Channel
POWER
TV VIDEO 1
Only the receivable channels stored in memory
can be selected. When you change the channel,
channel number and "AUTO" appear on the
screen for a while.
coverage: VHF channels 1 to 12, UHF channels
21 to 69)
MONI
CH
1
MODE
H/P H/P
VOL VOL
CH
COLOR BRIGHT CONTRA
VCR
2
SKIP
A.MEMO CALL
KV-M700 remote controller
VIDEO 2
08
AUTO