Setting the channel selection
You can set the channel selection method either to select only the receivable channels in
memory or to select all the channels.
Remember that if you want to select only the receivable channels, you must store the channels
first. To store them, see page 11.
KV-M700 color monitor
Select TV as the input source.
Press the MODE button on the monitor or the remote
controller repeatedly to select TV.
Set the channel selection to "AUTO" or
Press the AUTO/MANU button on the monitor or the SKIP
button on the remote controller.
Each time you press the button, the channel selection
alternates between "AUTO" and "MANUAL."
MANUAL: All the channels can be selected. (Channel
Only the receivable channels stored in memory
can be selected. When you change the channel,
channel number and "AUTO" appear on the
screen for a while.
coverage: VHF channels 1 to 12, UHF channels
21 to 69)
KV-M700 remote controller