Schedule Blocking - NETGEAR DGN2200v3 User Manual

On the Port Triggering screen, click Add Service. The following screen displays:
1.
In the Service Name field, type a descriptive service name.
2.
In the Service User list, select Any (the default) to allow any computer on the Internet to use
3.
this service. Otherwise, select Single address, and enter the IP address of one computer to
restrict the service to a particular computer.
Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
4.
TCP/UDP.
In the Triggering Port field, enter the number of the outbound traffic port that will cause the
5.
inbound ports to be opened.
Enter the inbound connection port information in the Connection Type, Starting Port, and
6.
Ending Port fields.
Click Apply. The service appears in the Port Triggering Portmap Table.
7.

Schedule Blocking

You can specify the days and time that you want to block Internet access.

To schedule blocking:
Select Advanced > Security > Schedule to display the following screen:
1.
N300 Wireless ADSL2+ Modem Router DGN2200v3
Security
78