Upgrade The Firmware; Dashboard (Basic Home Screen) - NETGEAR DGN2200v3 User Manual

Upgrade the Firmware

When you set up your modem router and are connected to the Internet, the modem router
automatically checks for you to see if newer firmware is available. If it is, a message is
displayed on the top of the screen. See
more information about upgrading firmware.
Click the message when it shows up and click Yes to upgrade the modem router with the
latest firmware. After the upgrade, the modem router restarts.
CAUTION:
Do not try to go online, turn off the modem router, shut down the computer,
or do anything else to the modem router until the modem router finishes
restarting and the Power LED has stopped blinking for several seconds.

Dashboard (Basic Home Screen)

The modem router Basic Home screen has a dashboard that lets you see the status of your
Internet connection and network at a glance. You can click any of the six sections of the
dashboard to view more detailed information. The left column has the menus, and at the top,
there is an Advanced tab that you can use to access additional menus and screens.
Menus
(Click the
Advanced
tab to view
more)
Figure 7. Basic Home screen with dashboard, language, and online help
Home. This dashboard screen displays when you log in to the modem router.
•
Internet. Set, update, and check the ISP settings of your modem router.
•
Wireless. View or change the wireless settings for your modem router.
•
Attached Devices. View the devices connected to your network.
•
N300 Wireless ADSL2+ Modem Router DGN2200v3
Upgrade the Modem Router Firmware
Getting Started with NETGEAR genie
22
on page 82 for
Language
Dashboard
(Click to
view details)
Help