Whirlpool MDG22PRBWW0 Installation Instructions Manual page 16

A
Power supply cord,
3-wire connection:
B D
A. 3-wire receptacle (NEMA type 10-30R)
B. 3-wire plug
C. Neutral prong
D. Spade terminals with upturned ends
E. 3/4"(1.9 cm) UL listed strain relief
F. Ring terminals
G. Neutral (white or center wire)
A
E
Y
G F
Use where local codes permit connecting
cabinet=ground conductor to neutral wire.
1. Loosen or remove center silver-colored
terminal block screw.
2. Connect neutral wire (white or center
wire) of power supply cord to the center,
silver-colored terminal screw of the
terminal block. Tighten screw.
3. Connect the other wires to outer terminal
block screws. Tighten screws.
I I F
4. Tighten strain relief screws.
5. Insert tab of terminal block cover into
slot of dryer rear panel. Secure cover
with holddown screw.
6. You have completed your electrical
connection. Now go to "Venting
Requirements."
A. External ground conductor screw
B. Neutral ground wire
C. Center silver-colored terminal
block screw
D. Neutral wire (white or center wire)
E. 3/4_' (1.9 cm) UL listed strain relief
16