LG LRG3097ST Installation Instructions Manual page 10

INSIAllAIION INSIRUCIIONS
5. ASSEMBLE THE SURFACE BURNERS
CAUTION
DO NOT operate the burners without all parts in
place.
Place the burner caps and heads on the cooktop.
Make sure that the caps and heads are placed in the
correct locations. There is one small, one medium,
one large and one extra large burner head and cap.
f
Oval (Center) Burner
Head/Cap Assembly
! _ Small burner
S-_ %- :_._ ,, _ head and cap
..........
Med um burner I A
i _
s----_
neao an(] cap/ m I _ ..... _-_-
@ _ T_J i (°ns°me (°ns°me
' models) models)
I ................
Large burner Front of range Extra large burner
head and cap head and cap
Hole _ I .....
I I
Electrode
Make sure the hole in the burner head is positioned
over the electrode.
6. CHECK IGNITION OF SURFACE BURNERS
ELECTRIC IGMTION
Select a top burner knob and simultaneously push in
and turn to the "LITE" position. You will hear a clicking
sound indicating proper operation of the spark
module.
Once the air has been purged from the supply lines,
burner should ignite within 4 seconds.
After burner ignites, rotate knob out of the "LITE"
position. Try each burner in succession until all
burners have been checked.
OUALITY OF FLAMES
The combustion quality of burner flames needs to be
confirmed visually.
A Yellow flames--Call for service
B Yellow tips on outer cones--
It is normal for LP gas
C Soft blue flames--
It is normal for natural gas
With LP gas, some yellow tipping on outer cones is
normal.