Route Planning Option - Eclipse AVN76D Owner's Manual

Operation
Navigation Overview
Touch switch
[Street Names During
Navigation]
[Lane Information]

■ Route planning option

These settings determine how routes will be calculated. Touch the following switches: [Menu],
[Settings], [Route Planning]
Touch switch
[Road Types Used for Route
Planning]
[Route Calculation Method]
[Use Traffic Information]
[Recalculate To Avoid Traffic]
50
50
Street names and POI icons can get in the way on the map during
navigation. With this switch you can suppress these map elements
when Navigation is following your position on the map.
If you move the map, both the street names and POI icons reappear
immediately.
Some maps contain lane information to help you position your car in
the upcoming intersection. This setting tells Navigation whether to
display this information at the top or at the bottom of the map. You can
prevent the display of lane information.
To make the route fit your needs, you can also set which road types
are, where possible, to be considered for and excluded from the route.
Excluding a road type is a preference. It does not necessarily mean
total prohibition. If your destination can only be accessed using some
of the excluded road types, they will be used but only as much as
necessary. In this case a warning icon will be shown on the Route
Information screen, and the part of the route not matching your
preference will be displayed in a different color on the map.
You can choose from different route types. The routing method can be
changed temporarily while creating the route: When selecting the
destination, touch [Routing Methods] in the Cursor menu.
Touch [Routing Methods].
When traffic messages are received, this setting tells Navigation
whether to use that information in route planning.
This setting determines how Navigation uses the received Traffic
information in route recalculation:
● Automatic: When route recalculation becomes necessary based on
the received Traffic events, Navigation recalculates the route
automatically.
● Manual: When route recalculation becomes necessary based on
the received Traffic events, Navigation notifies you, but you can
decide whether to recalculate the route or not.
● Disabled: Traffic events are only taken account when the route is
recalculated in an off-route situation.
Description
Description