LG W1971SC User Manual page 8

Connecting the Display
Using the Computer
1.
Make sure to turn off the computer and product.
Connect signal input cable
screw of the signal cable.
A
Connect D-sub(Analog signal) Cable (PC)
B Connect D-sub(Analog signal) Cable (MAC)
2
Power Cord
Wall-outlet type
2.
Insert the Cable Deco Cover in the Stand Body in the correct direction.
3.
Press the power button on the front panel to turn the power
on. When monitor power is turned on, the 'Self Image
Setting Function' is executed automatically.
NOTE
' Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
'AUTO/SET' Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
and power cord
1 2
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable,
DVI cable) with ferrite cores to maintain standard compliance for the
product.
Headphone/Earphone Output
1
Signal Cable
Varies according to model.
7
W1971SC/W2271SC
in order, then tighten the
Mac adapter
For Apple Macintosh use, a
separate plug adapter is needed
to change the 15 pin high density
PC
(3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2
MAC
row connector.
Power Button
E
D