Table of Contents
Advertisement
On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
W2271TC
1280 x 1024 60Hz
1280 x 1024 60Hz
W1971SC/W2271SC
1280 x 1024 60Hz
1280 x 1024 60Hz
MENU : Exit
: Adjust
: Adjust
SET
: Select another
sub-menu
If this does not improve the screen image, restore the factory default settings. If necessary,
perform the white balance function again. This function will be enabled only when the input
signal is an analog signal.
Sub menu
SETUP
LANGUAGE
OSD
POSITION
WHITE
BALANCE
POWER
INDICATOR
FACTORY
RESET
Description
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
"LANGUAGE."
Press the
,
20
buttons to reset immediately.
Advertisement
Table of Contents
