Table of Contents
Advertisement
Control Panel Functions
(SOURCE Hot key)
VOLUME
Button
AUTO/SET
Button
Power Button/
Power Indicator
Buttons
Use these buttons to select or adjust functions in the On
Screen Display.
For more information,
refer to page 21.
Use this button to make either D-Sub or DVI connector
active. This feature is used when two computers are
connected to the display. The default setting is D-Sub.
(Only W2271TC )
Use this button to mute or adjust the sound volume.
<MUTE ON>
<MUTE OFF>
Use the
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1680 x 1050
Use this button to turn the display on or off.
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes
to amber.
buttons to adjust the speaker volume.
10
Advertisement
Table of Contents
