Optional Features - Hamilton Beach 14700 Use & Care Manual

840094100 ENv01 1/17/02 11:46 AM Page 5
To Vertical Steam
1. Unplug iron. Fill the Removable
Reservoir according to directions.
Replace Reservoir.
2. Plug iron into outlet.
3. Turn the Temperature Control Dial
to the highest setting.
4. Allow 2 minutes for the iron to reach
desired temperature.
5. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.

Optional Features

Adjustable Steam Knob
This switch provides minimum steam
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of
Blast Spray
6. Hold iron about 6 inches away from
7. To turn iron off, turn Temperature
8. Empty water from the iron following
NOTE: Do not allow hot soleplate to
touch delicate garments.
Automatic Shutoff Reset Button
for wool or maxi-
mum steam for
linen. Set the
switch to O to
change to Dry
Iron.
shut off and the light will go out. Push
the Reset Button to turn iron back on.
The Power On Light comes on when
the iron is plugged in and remains on
until the iron is unplugged. The light
steam. Push Spray
stays on even if Temperature
Button to release a
Control Dial is turned to Off.
fine spray of water
for difficult wrinkles
in cotton or linen.
garment and
press and
release the
Blast Button
to steam out
wrinkles. Do not
press Blast
Button more
than once every
2 seconds.
Control Dial to Off. Unplug iron.
directions in "Caring for Your Iron."
(on selected models)
and Power On
Light –
Reset
Button
Automatic Shutoff
Reset Button light
comes on when
the iron is first
Power
plugged in. After
Light
1 hour, the iron will
The
5