Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Related Manuals for Pinnacle Technology PP7X
Summary of Contents for Pinnacle Technology PP7X
- Page 1 PP7X PRINTER USER’S MANUAL Pinnacle Technology Corp.
-
Page 2: Safety Precautions
Safety Precautions Before using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. WARNING Connect the printer with a reliable grounded power receptacle. Do not plug with large electronic machines in one multi-outlet, which can provoke power fluctuation or over-heating, even a fire. Do use the only supplied adapter. -
Page 3: Table Of Contents
CONTENTS INTRODUCTION ............................. 1 Application Range ..........................1 Unique Functions..........................1 Advanced Functions and Features ..................... 1 Specifications............................. 2 Appearance ............................3 Accessories ............................4 INSTALLATION............................... 5 Display Installation (The printer with customer display) ..............5 Communication Board Replacement ....................7 Paper Installation .......................... -
Page 4: Introduction
And it could be combined with cash registers, touch-pos terminals, computers and other equipments. There are two kinds of printers about PP7X Printer: the printer with customer display, and the printer without customer display. -
Page 5: Specifications
1.4 Specifications Optional type PP721MX PP721HX PP71MX PP71HX Speed 150mm/s 250mm/s 150mm/s 250mm/s Power Supply DC24V /2A Print Method thermal print Resolution 203dpi Paper type Thermal paper Paper Paper width 57.5±0.5mm 79.5±0.5mm Paper roll diameter 80mm Paper installation type Unique mechanism that make paper installation easily ANK character set, Chinese GB2312, Character Character set... -
Page 6: Appearance
1.5 Appearance The printer with customer display Customer display Upper cover switch Power switch The printer without customer display: Upper cover switch Power switch... -
Page 7: Accessories
1.6 Accessories Adapter Cable User manual PC Disk Customer display (only for the Paper roll printer with the customer display) -
Page 8: Installation
2 INSTALLATION 2.1 Display Installation (The printer with customer display) Install customer display before using the PP7X printer. Press printer upper cover button upwards to open the printer cover as picture1 Picture1... - Page 9 Install the customer display via the interface as picture 2. Picture 2 Use screwdriver to lock the customer with screw tightly as picture 3. Picture 3...
-
Page 10: Communication Board Replacement
2.2 Communication Board Replacement Note: Make sure that PP7X is powered off when you are changing the communication board. Power off PP7X for more than 10s, then the communication board can be replaced. (1) Use cross screwdriver to unscrew the two screws of the communication board. as picture 4... -
Page 11: Paper Installation
(2) Take off the communication board and replace it as picture 5. Picture 5 (3) Install the new communication board along the slot, lock the two screws. We suggest that you should tighten the two screws side by side to avoid damaging the main board. Note: Don’t press the communication board if it does not at the same level with the printer. - Page 12 (3) Insert the paper roll to the printer as picture 7. Picture 7 (4) Be sure to note the correct direction thats the paper comes off the roll shown as picture 8. Right Wrong Picture 8 (5) Pull out a small amount of paper to make it parallel with the alignment line as picture 9. and then close the upper cover by pressing its front middle part until you hear a ‘click’...
-
Page 13: Setting The Printer
(6) After closing the upper cover tear off the paper as picture 10. Picture 10 3 SETTING THE PRINTER 3.1 Using the Printer Power indicator light To prompt error To prompt the paper is run out Press the button once to advance paper once line. You can also hold down the Feed button to feed paper continuously. -
Page 14: Connecting The Computer
3.2 Connecting the Computer (1) Plug the cable connector securely into the printer’s interface connector. (2) Tighten the screws on both sides of the cable connector as picture 11. Picture 11 (3) Attach the other end of the cable connector to the computer. 3.3 Connecting the Power Supply CAUTIONS When connecting or disconnecting the power supply from the printer, make sure that the power supply is not... -
Page 15: Self Test
4 SELF TEST Press key ‘Feed’ and hold it, and then power on the machine at the same time, it will print a piece of Test Page. The information of this Test Page includes the printer’s model, version, IP address (Ethernet port), ID and the default setting of the dip switch when leave factory. -
Page 16: Rs232 (D9)
5.1.1 RS232 (D9) Host side Printer side RS233 RS232 /RTS /RTS /RXD /RXD HOLE1 HOLE1 /CTS /CTS /TXD /TXD DSUB 9PIN/ DSUB 9PIN/ The definition of D9-P9 Pin No. Signal Name Direction Function Output Transmit Data Input Receive Data ——— Frame Ground Input Clear to Send... -
Page 17: Rs232 (Phone6C)
Note: Users could install a network connector (8-8) to extend the D9-P8 communication cable freely. Pin No. Signal Name Direction Function Input Receive Data Output Ready To Send Output Transmit Data Input Clear to Send Frame Ground 5.1.3 RS232 (PHONE6C) Host Side Printer Side /RTS... -
Page 18: Rs232 (Phone4C)
Pin No. Signal Name Direction Function Input Clear to Send Frame Ground Output Receive Data Output Transmit Data Output Ready to Send 5.1.4 RS232 (PHONE4C) -
Page 19: Parallel Interface
Host Side Printer Side The Definition of D9-P4 Pin No. Signal Name Direction Function Frame Ground Input Receive Data Output Transmit Data 5.2 Parallel Interface... - Page 20 Compatibility Pin No. Source Nibble Mode Byte Mode Mode Host nStrobe HostClk HostClk Host/Printer Data 0 Data 0 Host/Printer Data 1 Data 1 Host/Printer Data 2 Data 2 Host/Printer Data 3 Data 3 Host/Printer Data 4 Data 4 Host/Printer Data 5 Data 5 Host/Printer Data 6...
-
Page 21: Usb Interface
5.3 USB Interface Pin No. Signal Name Function Shell Shield Frame Ground VBUS Host Power Data Line D- Data Line D+ Signal Ground 5.4 Drawer Port Definition DRAWER DRAWER1# DRAWER_SW# P+24V DRAWER2# PHONE6P6C 102/2KV/DIP EPSON POS PRINTER Drawer... -
Page 22: Dip Switch
Pin No. Signal name Direction Frame ground Drawer kick-out drive signal 1 Output Drawer open/close signal Input +24V Drawer kick-out drive signal 2 Output Signal ground DRAWER P+24V DRAWER_SW# DRAWER1# DRAWER2# PHONE4C Aclas Drawer Pin No. Signal name Direction +24V Drawer open/close signal Input Drawer kick-out drive signal 1... - Page 23 The Dip Switch There are 8 Dip Switch altogether, each switch has its own function, please refer to the diagram below: DIP-8 Function SW-1 Select cutter SW-2 Select buzzer SW-3 Reserve SW-4 Select hardware flow control SW-5 Select print density Light Dark SW-6...
-
Page 24: Maintenance
NOTE: We suggest that you should not select ‘dark’ density level, or it may reduce the life time of the printer head for 15 . SW-7 and SW-8 are used to control baudrate, the on/off status of SW-7 and SW-8 is able to compose different baudrate. - Page 25 (2) Clean the printer head with a cotton swab moistened with alcohol solvent. (3) Clean the platen roller and paper end sensor with cotton swab moistened with water. (4) Insert a paper roll and close the printer cover. Thermal printer head Attention: Do not touch the thermal printer head.
-
Page 26: Troubleshooting
8 TROUBLESHOOTING 1) Removing a paper jam (1) Turn the power off. (2) Open the paper cover, remove the jammed paper. (3) Install the paper to the printer correctly, close the paper cover. Make sure the paper cover is closed well (refer to Chapter 2.3 (5)). - Page 27 9) Paper near end or paper is used up. If the paper is near end or used up, the light of paper out and power will light on at the same time and the warning light will flash with ‘beep-beep-beep’ sound. In this case, the printer will stop printing. Install a new paper roll, the printer will continue printing.
- Page 29 DPP701ENV2-21...
Need help?
Do you have a question about the PP7X and is the answer not in the manual?
Questions and answers