1.
Pull top drawer slide rails out and set top drawer on slide rails.
4. In the cabinet under the sink, coil excess drain hose and wrap
with a zip tie. Plug in dishwasher or reconnect the power.
/
2. Pull slide rails forward until they snap into position.
5.
/
Select the Rinse Only cycle and press START/RESUME. Allow
the dishwasher to fill, rinse and drain. Check for leaks. If leaks
are found, secure the connection and repeat this step.
If you need Assistance
or Service:
Please reference the "Assistance or Service" section of the User
Instructions or contact the dealer from whom you purchased your
dishwasher.
3. Push top drawer in and repeat above steps for bottom drawer.
15