Route Electrical Wiring; Route Water Supply Line And Drain Hose - KitchenAid KUDH03DTBL0 Installation Instructions Manual

1, Oonnect water supply line to water valve on dishwasher.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-hand side utility route
m
Route wire through 1V2" (3.81 cm) hole located 8" (20.32 cm) above
the floor.
After routing the electrical wire through the right-hand hole, attach
the wire to back left-hand side of cabinet wall 8" (20.32 cm)
above the floor. Then continue routing the wire along the left-hand
side of cabinet opening to the front of the opening.
Option 2: Left-hand side utility route
2. Route water supply line and drain hoses based on your
cabinet requirements.
Option 1: Right-hand side utility access
• For right-hand routing, drain hoses are shipped in the
correct position. Place the water supply line in the clip as
shown.
Route wire through 1V2" (3.81 cm) hole located 8" (20.32 cm) above
the floor.
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet to the
front of the opening.