Connecting Hd3000 To Av Reciever - Optoma HD-3000 User Manual

• Back Panel
9
7
4
5
IN 1
VIDEO S-VIDEO Y
IN 2
AC IN
COMPONENT IN
8
6
4: AC IN
5: Composite 1/CVBS 1 (NTSC, PAL and SECAM)
6: Composite 2/CVBS 2 (NTSC, PAL and SECAM)
7: S-video 1 (NTSC, PAL and SECAM)
8: S-video 2 (NTSC, PAL and SECAM)
9: Component YPbPr/BNC 1 (NTSC, PAL and SECAM, 480i/p, 576p, 720p and 1080i)
10: Component YPbPr/BNC 2 (NTSC, PAL and SECAM, 480i/p, 576p, 720p and 1080i)
11: DC 12V OUTPUT
12: DC 12V OUTPUT
13: YPbPr/RGBHV 1 (NTSC, PAL and SECAM, 480i/p, 576i/p, 720p and 1080i)
14: YPbPr/RGBHV 2 (NTSC, PAL and SECAM, 480i/p, 576i/p, 720p and 1080i)
15: HDMI 1 (480i/p, 576i/p, 720p and 1080i)
16: HDMI 2 (480i/p, 576i/p, 720p and 1080i)
17: HDMI 3 (NTSC, PAL and SECAM, 480p, 576p, 720p, 1080i)
18: HDMI TO AV RECEIVER
19: HDMI FROM AV RECEIVER
20: TO DISPLAY
21: RS232
22: IR Module

Connecting HD3000 To AV Reciever

For maximum flexibility when integrating into existing entertainment systems, the HD3000
Video Scaler is equipped with 2 HDMI outputs. One output directly sends the signal out to
the display and the second output sends the signal out to an HDMI equipped AV receiver.
There are three ways to connect the HDMI output from the HD3000 Video Scaler.
Option 1
Using HD3000 Video Scaler as video source selector and HDMI equipped AV Receiver for
audio:
11
13
Pb
Pr
DC-12V G/Y B/Pb R/Pr H
BNC IN
10
12
14
Professional Video Scaler and Color Management System
V
To
HDMI IN-1
HDMI IN-2 HDMI IN-3
AV receiver
HDMI SWITCH
17
18
15
16
HD3000 User's Guide
22
21
RS-232 IR Module
From To
AV receiver display
19
20
HD3000 User's Guide 8