Optoma HD-3000 User Manual page 111

Color Vividness
The HD3000 includes 3 preset color management settings and one user definable setting.
You can easily switch between the modes to achieve different effects.
1.
Use "h", "i" arrow keys to select the "Color Vividness" adjustment item, press "Enter" key
or "g" key to enter this adjustment item. The Menu disappears and a small adjustment bar
is shown (as shown below).
. Use "f", "g" arrow keys to select default modes.
3.
For User mode adjustment, put cursor on "User", press "Enter" key to enter this
adjustment item. The Menu disappears and a sub adjustment menu is shown (as shown
below).
Color Vividness
4. Use "h", "i" arrow keys to select the desired adjustment item, press "f", "g" arrow keys
to adjust image.
5. User can select and setup their favorite settings on "User" and adjust submenu shows
as the following. (Please refer to the following description and graphic about Saturation and
Hue adjustment details.)
1) Choose a color (Green, Blue, Cyan, Yellow, Magenta and Red) and move to "Saturation" or
"Hue" to fine-tune.
2) Enter "Saturation" to adjust "level" (brightness level) on Lengthwise gradation from level 0
to 15, and then adjust the value of Saturation from -100 to 100 in accordance with each
level selected.
I ADVANCED
IMAGE
Noise Reduction
IMAGE Gamma
Color Temp
Image Mode
DISPLAY
Edge Enhancement
Color Vividness
B/W Extension
SYSTEM
Demo
Reset
SETUP
Select Enter
Enter
1
Off
Professional Video Scaler and Color Management System
0
1
Warm
Film
Off
Off
Off
Off
Back
Menu
2 3 User
HD3000 User's Guide
HD3000 User's Guide
47