Download Print this page

Package Contents - Onkyo SKF-L500 Instruction Manual

Speaker system skf-l500

Advertisement

Package Contents

• SKF-L500: Front speaker
• Speaker cable, 4.5 m
×
• Cork spacers
8
×
• Speaker base
2
×
• Bass fixing screws
Placement
SKF-L500: Front left and right speakers
These output the overall sound. Their role in a home
theater is to provide a solid anchor for the sound image.
They should be positioned facing the listener at about
ear level, and equidistant from the TV. Angle them
inward so as to create a triangle, with the listener at the
apex.
• The speaker cabinets are sensitive to extreme temper-
atures and humidity, do not put them in locations sub-
ject to direct sunlight or in humid places, such as near
an air conditioner, humidifier, bathroom, or kitchen.
• Do not put water or other liquids close to the speak-
ers. If liquid is spilled over the speakers, the drive
units may be damaged.
Speaker Bases
Using the supplied cork spacers
We recommend using
the supplied cork spac-
ers to achieve the best
possible sound from
your speakers. The cork
spacers prevent the
speakers from moving,
providing a more stable
setup.
Attaching the speaker bases
Before you connect the speakers, attach the supplied
speaker base to each SKF-L500.
1. Turn the speaker upside down.
2. Align the screw holes on the speaker base with
those on the bottom of each speaker, and affix the
speaker base using the supplied screws.
2
×
2
×
2 (red, white)
8
SKF-L500
Cork spacers
Bottom of speaker base
SAFETY PRECAUTIONS:
• Attach the speaker bases on a flat, level, and stable
floor.
• After you attach the speaker bases, make sure that the
speakers stand upright and are stable.
Using the speaker cable hook
Each supplied speaker base features a speaker cable
hook. It is recommended that you pass the cables
through the hook to avoid tangled cables.
Speaker cable
Speaker base
■ Preventing the speakers from falling
To install the speakers securely, remove the seal from
the upper rear part of each speaker to expose a small
hole. Install an eye hook into the hole, then secure the
speaker against the wall using a cord.
Top of SKF-L500
Eye hook
Supplied screws
Speaker base
Bottom of
SKF-L500
Speaker cable
hook
Secure the speaker
against the wall using
a cord.

Advertisement

loading