Temperature Selector; Spin Speed Selector - Hoover Nextra Instruction Book

40001979Eng.qxd 21/09/2004 17:20 Page 22

Temperature Selector

(Temperatur °C)
The washing machine is equipped with a
Temperatur °C selector knob to set the
temperature you require. Bigger energy savings
can be achieved by using the lower temperature
settings around the dial between and 40°C.
By selecting the position, the wash
temperature is limited to the water inlet
temperature, thus reducing energy consumption
further. We recommend that the temperature
shown on wash care garments should never be
exceeded.
In the case where the temperature has been
accidentally set higher than that of the chosen
programme, (see Programme Guide table), the
machine will lower the temperature automatically
to protect the fabrics.

Spin Speed Selector

(Schleudern)
By adjusting the control knob it is possible to
reduce the maximum spin speed of your selected
programme to suit your needs and to help reduce
any creasing of fabrics. Turn the Schleudern
selector knob until the indicator aligns with the
required spin speed. The maximum spin speed
will vary depending on the specification of the
machine.
22