Hoover Nextra Instruction Book page 21

40001979Eng.qxd 21/09/2004
Fast Iron (Leichtbügeln)
This option is only available on synthetics, acrylics, woolmark and silk
programmes.
Programme
Synthetics
(Synthetik)
Acrylics
(Feinwäsche)
Woollens
(Woolmark)
Silk
(Seide)
17:20 Page 21
Fast Iron Function
Programme is completed
by a short, very low spin
speed.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
The machine stops in the
final rinse stage and the
option indicators
blink.The load is held in
the water in the drum,
thus reducing creasing
and enabling easier
ironing.
Action to complete the cycle
If a spin cycle is required please
select the appropriate spin (see
Programme Guide).
Press the Leichtbügeln button to
continue with the programme.
The machine will then pump out
the remaining water and the
programme will conclude with a
short spin. Finally, the
programme carries out a brief
tumbling action to loosen the
items in the load.
Press the Leichtbügeln button
and the machine will pump out
the water and complete the
cycle with a short spin cycle.
Press the Leichtbügeln button
and the machine will pump out
the water to complete the cycle.
The clothes load will not be spun
and will therefore be very wet.
21