Advertisement
Installation Clearances
Cabinet
opening
dimensions
shown
are for 25" (64 cm) countertop
depth,
24" (61 cm) base cabinet
depth
and 36" (91.4 cm)
countertop
height.
30" (76.2 cm) models
36" (91.4 cm} models
A
A
A. 18" (45.7 cm) upper cabinet to countertop
B. 30" (76.2 cm) model: B = 22" (55.9 cm)
C. Junction box to be located in this shaded area
D. 4" (10.2 cm)
E. 20" (50.8 cm)
F. 12" (30.5 cm)
G. 5_/2'' (14 cm)
H. Gas line opening to be located in this shaded area
/. 3Y2" (8.9 cm)
d. 8" (20.3 cm)
K. 30" (76.2 cm) model: K = 30_/_" (76.8 cm)
L. 4" (10.2 cm) min. clearance from both sides of range to side
wall or other combustible
material
M. For minimum clearance to top of range, see NOTE*
N. 30" (76.2 cm) model: 30" (76.2 cm) min. upper cabinet width
O. 13" (33 cm) max. upper cabinet depth
A. 18" (45.7 cm) upper cabinet to countertop
B. 36" (91.4 cm) model: B = 28" (71.1 cm)
C. Junction box to be located in this shaded area
D. 4" (10.2 cm)
E. 20" (50.8 cm)
F. !2" (30.5 cm)
G. 5_2" (14 cm)
H. Gas line opening to be located in this shaded area
L 3_2"
(8.9
cm)
J. 8" (20.3 cm)
K. 36" (91.4 cm) model: K = 36_/_" (92.1 cm)
L. 4" (10.2 cm) min. clearance from both sides of range to side
wall or other combustible
material
M. For minimum clearance to top of range, see NOTE*
N. 36" (91.4 cm) model: 36" (91.4 cm) min. upper cabinet width
O. 13" (33 cm) max. upper cabinet depth
*NOTE: Minimum
Clearances
30" (76.2 cm) models: 36" (91.4 cm) minimum clearance
36" (91.4 cm) models: 42" (106.7 cm) minimum clearance
When bottom of wood or metal cabinet is protected by not less than _/4"(0.64 cm) flame retardant millboard covered with not less than
No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 ram) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) models: 42" (106.7 cm) minimum clearance
36" (91.4 cm) models: 48" (121.9 cm) minimum clearance
Between the top of the cooking platform and the bottom of an unprotected
wood or metal cabinet.
If installing a hood or a microwave hood combination
above the range, follow the hood instructions
for dimensional clearances above
the cooktop surface.
Advertisement
