Reinforcing The Bass; Muting The Sound; Changing The Display Brightness; Using The Sleep Timer - JVC RX-7040B Instructions Manual

The following basic operations are possible only using the
remote control.
Changing
DIMMER
the Display
DVD
Brightness
DVD MULTI
TV/DBS
TV VOL
MIDNIGHT RETURN FM MODE
MODE
CD-DISC
TEST
Reinforcing the
Bass
L FRONT
L SURR

Reinforcing the Bass

You can boost the bass level.
• Once you have made an adjustment, it is memorized for each
source.
Press BASS BOOST to boost the bass level.
The B. BOOST indicator lights up on the display.
• Each time you press the button, Bass Boost turns on ("BOOST
ON") and off ("BOOST OFF") alternately.
Notes:
• This function affects only the sounds from the front speakers,
center speaker, and subwoofer.
• When Analog Direct is in use (see page 17), the Bass Boost is
canceled temporarily.

Muting the Sound

Press MUTING to mute the sound through all speakers and
headphones connected.
"MUTING" appears on the display and the volume turns off (the
VOLUME level indicator goes off).
To restore the sound, press MUTING again.
• Turning MASTER VOLUME on the front panel or pressing
VOLUME +/– on the remote control also restores the sound.

Changing the Display Brightness

You can dim the display.
Press DIMMER.
• Each time you press the button, the brightness level of the display
changes as follows:
Dimmer
Canceled
(Normal display)
18
AUDIO
CATV/DBS VCR
TV
DVD CD TAPE/CDR
Muting the
VCR FM/AM MUTING
Sound
CHANNEL VOLUME
10 0 10
SLEEP
Using the Sleep
BASS CENTER
D.EQ FREQ
BOOST TONE
Timer
R CENTER D.EQ LEVEL
R
S.BACK SUBWFR
Much dimmer

Using the Sleep Timer

Using the Sleep Timer, you can fall asleep while listening to music.
When the shut-off time comes, the receiver turns off automatically.
Press SLEEP repeatedly.
The SLEEP indicator lights up on the display, and the shut-off time
changes in 10-minute intervals:
10 20 30 40
OFF
To check or change the time remaining until the shut-off time:
Press SLEEP once.
The remaining time until the shut-off time appears in minutes.
• To change the shut-off time, press SLEEP repeatedly.
To cancel the Sleep Timer:
Press SLEEP repeatedly until "SLEEP OFF" appears on the display.
The SLEEP indicator goes off.
• Turning off the power also cancels the Sleep Timer.
Recording a source
For analog-to-analog recording
You can record any analog playback source onto the recording
components connected to the audio output jacks on the rear of
this unit at the same time.
For digital-to-digital recording
You can record the currently selected digital input source through
the receiver to a digital recording device connected to the
DIGITAL OUT terminal.
Notes:
• Analog-to-digital and digital-to-analog recordings are not
possible.
• The output volume level, Midnight Mode (see page 16), Bass
Boost (see the left column), Equalization patterns (see page
28), Surround and DSP modes (see pages 30 to 35) cannot
affect the recording.
Basic adjustment auto memory
This receiver memorizes sound settings for each source—
• when you turn off the power,
• when you change the source, and
• when you assign the source name (see page 17).
When you change the source, the memorized settings for the
newly selected source are automatically recalled.
The following can be stored for each source:
• Analog/digital input mode (see pages 15 and 16)
• Midnight Mode (see page 16)
• Input attenuator mode (see page 16)
• Analog Direct (see page 17)
• CC Converter (see page 17)
• Equalization pattern (see page 28)
• Speaker output levels (see page 28)
• Surround and DSP mode selection (see pages 33 and 35)
• Bass Boost setting (see the left column)
Notes:
• If the source is FM or AM, you can assign a different setting for
each band.
• If you want to memorize the volume level with the above
settings, set One Touch Operation to "ON" (see page 26).
50 60 70 80 90
(Canceled)