Cleaning And Maintenance - Giant VT SERIES Owner's Manual

6. Cleaning and maintenance.

Proper maintenance of a Giant VT bicycle is important to insure years of trouble free safe riding and
enjoyment.
We recommend taking this bike to your authorised Giant dealer for periodic service and inspection
of suspension systems. Parts such as seals, elastomer bumpers and bearings can be adversely
affected by use, dirt and ultraviolet radiation. The bike should be returned to an authorised Giant
dealer for front fork and rear shock inspection and adjustment once a year or more often if the bike
is used in extreme conditions.
Note: this is not covered under the terms of the warranty and is not necessarily free of charge!
DO NOT use high-pressure water or air hoses to clean bike. This can force dirt into areas that may
cause damage.
TM
DO NOT lubricate any of the pivot points. These are high quality self lubricating Teflon or similar
surfaced pivots.
See also the manuals of the suppliers of the suspension fork, rear shock, and other parts that come
with this Giant VT bike / frame.
Bicycles and bicycle components are more complex than ever before. It is very important that your
dealer carries out any repair or maintenance, which is not described in this manual. Consult your
dealer for help in determining your maintenance needs.
How much of your bike's service and maintenance you can do depends on your skill and
experience, and whether you have the special tools required. If you want to learn how to work on
your bicycle ask your dealer for advice on a suitable book and local bicycle repair courses.
Warning.
Many bicycle service and repair tasks require special knowledge and tools. Do not begin
any adjustments or service on your bicycle if you have the slightest doubt about your
ability to properly complete them. Improper adjustment or service may result in damage to
the bicycle or in an accident which can cause serious injury or death.
Pag. -12-