Troubleshooting And Specifications - Avantco MX20 User Manual

User Manual
Troubleshooting
Trouble
The axles can't work when
operating the machine
The mixing bowl is out of position
Leaks oil
Difficult to move the bowl up and down
The motor is overheated
and speed is down
Noise and overheating
Mixer touches bowl
6
Possible Causes
Poor contact of the electrical
equipment
Moving direction is not correct
Sealing washer is damaged
Slideway is rusted
The voltage is not enough, or
incorrect speed
Poor lubrication
The mixing device or bowl de-
formed
Solution
Check the Plug
Change
Change
Clean the slideway and lubricate
Check the voltage or use
lower speed
Add or change lubrication
Repair or change the bowl
or mixing device
www.AvantcoEquipment.com