Sound Adjustment - Toshiba 24PB1E Owner's Manual

2
Press s or r to select Auto NR, and then
press v or w to select On or Off.
Off mode :
MPEG NR menu and DNR menu are available.
• MPEG NR mode: Low, Middle, High or Off
• DNR (Digital Noise Reduction) mode: Low,
Middle, High or Off
Note:
DNR function is available for 480i and 576i
signals.
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
1
From the PICTURE menu, press s or r to
select 3D Colour Management.
2
Press v or w, then press v or w to select
On.
3
Press Q, then press s or r to select Base
Colour Adjustment.
4
Press Q, then press s or r to select an
item you want to adjust.
Base Colour Adjustment
Hue Saturation
Red 0
0
Green
Blue
0
Yellow 0
0
Magenta
Cyan 0
Reset
5
Press w, then press v or w to select Hue,
Saturation or Brightness.
6
Press s or r to adjust the settings as
required.
Hue Saturation
Red 0
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu,
press s or r to select Reset.
2
Press Q.
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
18
Using the TV's features
1
2
Activating Auto Brightness Sensor
When the Auto Brightness Sensor is activated,
it will automatically optimise the backlighting
levels to suit ambient light conditions.
1
2

Sound adjustment

Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal.
1
2
Brightness
0 0 Mono mode
0 0
If you experience noise or poor reception of any
0 0
stereo/bilingual programme, set the MTS mode
0 0
0 0
to Mono.
0 0
Noise will be reduced and reception may
improve.
Note:
If you experience noise with a particular
programme on whose channel reception is
usually good, try setting MTS mode to Auto,
then switch g to e Mono (monaural).
Brightness Selecting the Dual 1 or Dual 2 mode
0 0
You can hear only Dual 1 or Dual 2 sound
selected, whenever bilingual programmes are
received.
1
2
Notes:
• When the MTS setting is in Mono mode, the
• The Dual menu setting status remains even if
From the PICTURE menu, press s or r to
select Active Backlight Control.
Press v or w to select On or Off.
From the PICTURE menu, press s or r to
select Auto Brightness Sensor.
Press v or w to select On or Off.
Press MENU, and then press v or w to
display the SOUND menu.
Press s or r to select MTS, and then press
v or w to select Auto or Mono.
Press MENU, and then press v or w to
display the SOUND menu.
Press s or r to select Dual, and then press
v or w to select Dual 1 or Dual 2.
Dual menu is not selectable.
the TV is turned off.