Toshiba 24PB1E Owner's Manual page 16

Dot by Dot
"Dot by Dot" is a non-scaling display. Depending
on the input signal format, the picture is
displayed with side panels and/or bars at the top
and bottom (i.e. VGA input source).
Notes:
• In the PC connected via HDMI or RGB/
PC terminal (- page 26), the picture size
selection is PC Wide, PC Normal or Dot by
Dot only.
• Using the special functions to change the
size of the displayed image (e.g. changing the
height/width ratio) for the purpose of public
display or commercial gain may infringe on
copyright laws.
• If the aspect ratio of the selected format is
different from the one of the TV transmission
or video programme, it can cause a difference
in vision. Change to the correct aspect ratio
picture size.
• When using the PC connected via HDMI or
RGB/PC terminal, the moving image quality
may be deteriorated.
Using the picture still
• Press to freeze the picture.
Even if an image is frozen on the TV screen, the
pictures are running on the input source. Audio
continues to be output as well.
To return to a moving picture, press
(Moving )
Note:
If you use this function except for the purpose of
your private viewing and listening, it may infringe
the copyright protected by the copyright laws.
Adjusting the Picture Position
Adjustment to the position of the picture may be
made to suit your viewing preferences.
16
Using the TV's features
1
From the SETUP menu, press s or r to
select Picture Position.
2
Press Q, then press s or r to select the
item you want to adjust.
3
Press v or w to adjust the settings as desired.
Notes:
• When the picture size is in Wide or 4:3 mode,
only the Horizontal position can be adjusted.
• When the picture size is in Native, PC Wide,
PC Normal and Dot by Dot mode, none of this
function will be available.
Resetting the Picture Position
This function resets your Picture Position
settings to the factory settings.
1
From the Picture Position menu, press s or
r to select Reset.
2
Press Q.
Activating the Picture Mode
This TV offers the choice of personalising the
picture style.
AutoView, Dynamic, Standard, Mild, Movie,
Eco Mode 1, Eco Mode 2, Game and PC are
preset options and affect many features/settings
within the TV.
Notes:
again.
• Because the AutoView mode automatically
adjusts picture settings based on ambient light
conditions, the Auto Brightness Sensor is
(S t ill)
greyed out when it is selected.
• If using Eco Mode 1 or Eco Mode 2 will be
changed the dark screen, and you will be able
to reduce power consumption.
The Eco Mode 2 is effect better than the Eco
Mode 1.
The Backlight mode is not available in the Eco
Mode 1 or the Eco Mode 2.
• Game mode is available in external input mode
(other than aerial input). When you select
Game mode, suitable widescreen formats will
be selected.
Picture Position
0
Horizontal Position
0
Vertical Position
Reset
0
Horizontal Position