Steam Function - Krups Coffee Machine Manual

• Place the pod in the filter holder fitted with
its «ESE» filter. In the case of a pod with a
tongue, fold down the tongue towards the
interior (5).
• Put the filter holder in place (2).
As soon as the appliance reaches the right
temperature, the indicator light (e) comes on.
• Then turn the function selector (c) to the
position « ».
• Once the recommended quantity of coffee
has been reached, turn the function selector
(c) to the position O.
• Remove the filter holder and throw away the
used measure, holding the filter in place
with the gripper clamp (4).

2. STEAM FUNCTION

The thumping noise which occurs while steam
is being produced comes from the intermit-
tent regulation of the pump and has no effect
on the proper working of the appliance.
Caution : during and after use of the
machine, the metallic parts of the steam
nozzle can become extremely hot.
. P
REPARING FROTHED AND STEAMED MILK FOR A
,
CAPPUCCINO A LATTE OR HOT CHOCOLATE
The steam function together with the Krups
auto cappuccino accessory makes it easy to
obtain milk with varying amounts of froth for
making a cappuccino, a latte or hot chocolate.
These liquids are drawn in through the flexible
tube (l4) and heated with the aid of steam
before coming out via the outlet nozzle (l5) of
the auto cappuccino accessory (l).
If the flexible tube (l4) is immersed directly in a
carton of milk, a single cup is enough to
prepare a cappuccino or a latte. You can
adjust the amount of froth of the milk by
using the dial (l3) of the auto cappuccino
accessory (l).
It is best to use fresh, skim or low-fat milk, not
boiled, and well chilled (kept in the
refrigerator). The container must also be cold
for optimal results (do not run the container
under hot water before frothing the milk).
We recommend that you clean the auto
cappuccino accessory immediately after use -
10
please refer to the section "Cleaning the
Machine".
If you are making a cappuccino or latte, you
will need at least a 5 oz. cup (150 ml).
. Cappuccino is made using 1/3 espresso, 1/3
hot steamed milk and 1/3 frothed milk.
. Café latte is made using 1/2 espresso, 1/2
steamed milk, and topped with a bit of frothy
milk.
. Hot chocolate: immerse the flexible tube
directly into the carton if the chocolate milk is
ready-made, or heat the milk if you are using
powdered chocolate. Then simply mix the
powder in the heated milk.
. Mounting of the Autocappuccino
accessory (l) :
• Move the steam nozzle (h) to the exterior of
the appliance and unscrew his ring (h3).
• Mount the auto cappuccino accessory (l) in
place of the steam nozzle (h).
• Screw the ring (l1) of the auto cappuccino
accessory (l). Be careful not to dislodge the
seal (13).
. Using the auto cappuccino accessory (l):
• Fill the water container with fresh, cold
:
water (1) and put the «on/off» switch (d) on
«I» position.
The operating light (d1) will come on.
• Turn the selector (c) to the setting «
• Immerse the flexible tube (l4) in the milk to
be heated. The tube must touch the bottom
of the container (12).
• Place a cup one third filled with freshly-
made espresso (12) under the outlet nozzle
(l5).
• Turn the dial (l3) to the setting «
will obtain a fine smooth froth.
• To obtain milk which is less frothy, turn the
dial (l3) to the top of the user scale.
Once the appliance reaches the correct
temperature, the temperature control
indicator light (e) comes on.
• Turn the selector (c) to the setting «
Hot frothy milk will come out of the outlet
nozzle.
».
». You
».