Wireless Print Server Not Installed; Communication Not Available" Message Displays When Printing Wirelessly - Lexmark 201 User Manual

Notes:
•
If you change network settings, change them on all the network devices before changing them for the access
point.
•
If you have already changed the wireless network settings on your access point, then you must change the
settings on all the other network devices before you can see them on the network.
For Windows users
1
Click or Start.
2
Click All Programs or Programs, and then select the printer program folder from the list.
3
Select Printer Home.
4
Click the Settings tab.
5
Click the Wireless setup utility link.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part
of the setup process.
6
Follow the instructions on the computer screen.
For Macintosh users
1
From the Finder desktop, double-click the printer folder.
2
Double-click Wireless Setup Assistant.
3
Follow the instructions on the computer screen.

Wireless print server not installed

You may see a message during installation indicating that the printer does not have a wireless print server installed.
If you are sure the printer is capable of wireless printing, try the following:
C
HECK POWER
Make sure the light is on.
"Communication not available" message displays when printing
wirelessly
These are possible solutions. Try one or more of the following:
M
AKE SURE YOUR COMPUTER AND PRINTER HAVE VALID
If you are using a laptop and have power saving settings enabled, you may see the "Communication not available"
message on your computer screen when you attempt to print wirelessly. This can occur if the laptop hard drive
has powered down.
If you see this message, wait a few seconds and then try to print again. The laptop and printer require a few seconds
to power up again and reattach to the wireless network.
IP
Troubleshooting
146
ADDRESSES FOR THE NETWORK