Manual Time Setting - La Crosse Technology 433 MHz RADIO CONTROLLED PROJECTIONALARM CLOCK Instruction Manual

2. Press and release MODE/MIN key to adjust the time zone. The range runs from 0,
1 to 9, then –9, -8 to 0, in consecutive 1-hour intervals.
3. Confirm with the SNOOZE key and enter the Manual time setting.

Manual time setting

In case the Projection clock cannot detect the DCF-signal (for example due to
disturbances, transmitting distance, etc.), the time can be manually set. The clock will
then work as a normal Quartz clock.
Hour flashing
Minutes flashing
14