Problems When Projection Starts; The Projector Does Not Turn On - Epson EB-435W User Manual

Problem Solving
Check
g
Is the contrast adjusted correctly?
Is it time to replace the lamp?

Problems when Projection Starts

The projector does not turn on

Check
Did you press the [t] button?
Are all of the indicators off?
Do the indicators turn on and off when the power cable is touched? There is probably a poor contact in the power cable, or the power cable may be defective. Reinsert the power cable. If this
Is the Control Panel Lock set to Full Lock?
Is the remote receiver set correctly?
Adjust the Contrast setting from the Configuration menu.
s Image - Contrast p.60
When the lamp is nearly ready for replacement, the images become darker and the color quality declines. Replace the
lamp with a new one.
s "Replacing the Lamp" p.96
Press the [t] button to turn the power on.
The power cable is not connected correctly or power is not being supplied.
Disconnect and then reconnect the power cable.
s "From Installation to Projection" p.28
Check the breaker and so on to ensure power is being supplied.
does not solve the problem, stop using the projector, disconnect the power cable from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Press the [t] button on the remote control. If you do not want to use Control Panel Lock, change the setting to Off.
s Settings - Control Panel Lock p.63
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.63
Remedy
Remedy
88